She had seen beautiful, rustic coolers at stores like Cabela’s, but they all retailed for over $100. She decided to put her old cooler to use rather than spend that money.
Luckily, she didn’t have to spend that much. She was able to spend only $30 on scrap wood, screws, nails, and pipe coupling โ plus a spigot, handles, and a bottle opener.
They measured the frame around the cooler, then made the legs 30 inches tall so it was counter height.
The frame should fit the cooler snugly. Visit Brooke’s blog for more detailed information on their own measurements.
Once the frame was in place, she cut the siding and attached it with nails.
They let the siding overhang the frame to hide the 2x2s.
For the side slats, they started with the center board and ensured that there was a hole for the spigot.
They also added a trim. Attention to detail on projects like this can really make a huge difference.
Next, they took the lid of the cooler and built its own frame with trimming. The cooler lid also fits snugly within its frame.
Hinges allow the new wooden lid to lift in the same way as the plastic one.
They also added a bottle opener and attached a spigot for more cute details.
And here’s the finished product!
Only $30 and a couple hours of work created a truly unique, beautiful addition to the backyard that will definitely get guests talking at the next party.